How to Install TWRP for Galaxy S9 Snapdragon
If you’re looking to install TWRP on your Galaxy S9 with a Snapdragon processor, here’s what you need to do.
First, download the TWRP image for your device from the link below. Make sure to download the correct image for your device, as using the wrong image can brick your phone.
Once you have the TWRP image file downloaded, rename it to “twrp.img” and save it to your computer.
Next, boot your Galaxy S9 into Download Mode. To do this, power off your device, then press and hold the Volume Down + Bixby + Power buttons simultaneously.
Once your device is in Download Mode, connect it to your computer via USB.
Now, open a command prompt or Terminal window on your computer, and navigate to the folder where you saved the twrp.img file. Then, type the following command into the command prompt or Terminal, followed by the Enter key:
fastboot flash recovery twrp.img
This will install TWRP on your Galaxy S9.
Once TWRP is installed, you can boot into it by pressing and holding the Volume Up + Bixby + Power buttons simultaneously.
Table of Contents
How to Install TWRP for Galaxy S9 Snapdragon
What is TWRP?
TWRP is short for Team Win Recovery Project. It is an open-source software custom recovery image for Android devices. TWRP allows users to install custom ROMs, root their devices, backup and restore their data, and more.
In order to install TWRP on your Galaxy S9, your device must be running on the Snapdragon processor.
Here are the steps to install TWRP on your Galaxy S9:
1. Download the TWRP image for your Galaxy S9 from the TWRP website.
2. Install the TWRP image on your Galaxy S9.
3. Boot your Galaxy S9 into TWRP recovery mode.
4. Select the “Install” option from the main menu.
5. Navigate to the location of the TWRP image on your device and select it.
6. Swipe the slider at the bottom of the screen to install TWRP.
7. Once the installation is complete, select the “Reboot” option from the main menu.
Your Galaxy S9 will now boot into TWRP recovery mode. From here, you can root your device, install custom ROMs, and more.
Why You Should Install TWRP
There are many reasons why you should install TWRP on your Galaxy S9 Snapdragon. TWRP is a custom recovery that provides many benefits over the stock recovery. It gives you the ability to install custom ROMs, kernels, mods, and other software that the stock recovery would not normally allow you to install. TWRP also allows you to backup your entire system, including your data and settings, so you can easily restore your device if something goes wrong.
TWRP is a custom recovery that is much more powerful than the stock recovery. It gives you the ability to install custom ROMs, kernels, mods, and other software that the stock recovery would not normally allow you to install. TWRP also allows you to backup your entire system, including your data and settings, so you can easily restore your device if something goes wrong.
Installing TWRP is relatively simple and can be done by following the instructions on the TWRP website. Once you have TWRP installed, you will be able to enjoy all of the benefits it has to offer.
How to Install TWRP
If you’re looking to install TWRP on your Galaxy S9, you’ll first need to make sure you have the right model. The Galaxy S9 is available in two different variants, one with a Qualcomm Snapdragon 845 processor and one with an Exynos 9810 processor. If you have the Snapdragon 845 model, you’ll need to follow the instructions below. If you have the Exynos 9810 model, you can find instructions on how to install TWRP here.
Before you begin, you’ll need to unlock the bootloader on your Galaxy S9. You can do this by following the instructions here. Once the bootloader is unlocked, you’ll need to put your phone into Download Mode. To do this, press and hold the Volume Down, Bixby, and Power buttons simultaneously. Once your phone is in Download Mode, connect it to your computer via USB.
Now that your phone is in Download Mode and connected to your computer, it’s time to flash TWRP. To do this, you’ll need to download TWRP for the Galaxy S9 Snapdragon 845 from here. Once you have the file downloaded, extract it to your computer. Inside the extracted folder, you should see a file named Odin3.exe.
Open Odin3.exe on your computer and click the AP button. Navigate to the folder where you extracted TWRP and select the file named twrp-3.2.1-0-star2qlte.img. Once you’ve selected the file, click the Start button in Odin.
TWRP will now begin installing on your Galaxy S9. Once it’s finished, your phone will reboot and you’ll be greeted by TWRP. From here, you can follow the instructions here to install a custom ROM or root your phone.
What to Expect After Installing TWRP
TWRP is a custom recovery for Android devices. It is a replacement for the stock recovery that comes pre-installed on most Android devices. TWRP has many features that the stock recovery does not, such as the ability to flash custom ROMs, backup and restore your device, and more.
After you install TWRP, you will be able to boot into the recovery. From here, you will be able to do things like flash custom ROMs, backup and restore your device, and more.
